3Slide the T/P switch to T and hold it there.
All the red and green lights on the voice terminal begin to flash, and a
tone sounds.
If the lights do not flash:
Do This
If
Then
A.
Check the green
the green power light
go to
B.
power light on the is on
control unit.
the green power light unplug the power
is off cord from the ac
outlet and plug it in
again. If the green
power light still does
not go on, contact
your equipment sup-
plier for assistance
before continuing
with the installation.
B.
Check the wiring the wiring connec-
make a note of the
run from the control tions are stable problem, and refer to
unit to the voice the Troubleshooting
terminal.
Table, page 26, after
you’ve completed the
installation.
you find one or more fix the connections. If
loose connections the voice terminal
lights still do not
flash, make a note of
it and refer to the
Troubleshooting
Table, page 26, after
you’ve completed the
installation.
3
If the tone does not sound:
Do This
If
Then
Use the voice ter-
minal’s volume con-
trol switch to turn up
the volume.
the tone sounds you’ve solved the
problem.
the tone still doesn’t
sound make a note of it and
refer to the
Troubleshooting
Table, page 26, after
you’ve completed the
installation.
4Slide the T/P switch to the center position.