PREPARE THE NETWORK INTERFACE

Your local telephone company should have installed a network interface with

1-line jacks (RJ11-type) or 2-line jacks (RJ14-type) for connecting your

MERLIN

system to your outside telephone lines. The drawing, right, shows the two types

of network interface and the 2-line adapter (267C) for the 2-line network inter-

face jack. The table, below, tells you what to do depending on the type of net-

work interface you have.

If the Network Interface
And
Do This
has a 1-line jack
(RJ11-type) for each out-
side line
each jack is labeled with
its telephone number Go on to the next sec-
tion, “Test the Outside
Lines,” page 9.
1-Line jack (RJ11-type)
each jack is not labeled
with its telephone
number
1.
2.
1.
2.
1.
2.
3.
Label each jack with
its telephone number
from the list provided
by the local tele-
phone company.
Go on to the next sec-
tion, “Test the Out-
sides Lines,” page 9.
has 2-line jacks
(RJ14-type) for the out-
side lines
each jack is labeled with
the telephone numbers
for its two outside lines
Plug a 2-line adapter
(267C) into each jack.
Go on to the next sec-
tion, “Test the Out-
side Lines,” page 9.
each jack is not labeled
with the telephone
numbers for its two out-
side lines
Label each jack with
the two telephone
numbers for its out-
side lines from the list
provided by the local
telephone company.
2-Line jack
(RJ14-type)
Plug a 2-line adapter
(267C) into each jack.
Go on to the next sec-
tion, “Test the Out-
side Lines,” page 9.
2-Line adapter
(267C)

8