AT&T 2U20 manual To store phone numbers into memory speed dial

Using Memory Speed Dial

To store phone numbers into memory speed dial:

Press the MEM/STORE key while the portable unit is inactive (i.e.; ON/OFF/MUTE indicator is off).

Manually enter the extension or phone number to be stored. Each number may be up to 16 digits long and may include one or more PAUSE or TONE key sequences

(See section on Using Other Function Keys).

Partner System users: To program an outside number on the Cord-Free Headset memory speed dial, enter 9, then press the Pause key twice before keying in the digits of the phone number you wish to store.

After entering the last of the key sequence, press the MEM/STORE key again and enter one of ten memory locations (i.e.; 0-9).

The portable unit will give a long audio tone if the above process is completed successfully.

For future reference, enter the memory location and the phone number on the memory dial directory.

To dial phone numbers using memory speed dial:

Turn on the portable unit by pressing one of the ON/OFF keys.

Listen for a dial tone, then press the MEM/STORE key and the memory location of the phone number to be dialed (i.e.; 0-9).

On/Off Low B
Mute
On/Off	Mute Redial/Pause

Flash Mem/Store Chnl

ABC DEF

On/Off Low B
Mute
On/Off	Mute Redial/Pause

Flash Mem/Store Chnl

ABC DEF

11