AT&T 2U20 manual REDIAL/PAUSE Key, MUTE Keys, CHNL Key, FLASH Key Home Office Use

Using Other Function Keys

REDIAL/PAUSE Key

To call the last number dialed, press the Redial/Pause key while the portable unit is turned on.

To insert a 3 second pause in a memory dialing sequence, press the Redial/Pause key when entering a number into memory storage.

Partner System users: Note that the Cord-Free Headset’s Redial key may not be effective if the last number dialed was for an outside call. In this case, use the Partner System’s Last Number Redial feature by pressing # 0 5.

MUTE Keys

In the mute mode, a caller will be unable to hear you, but you will be able to hear the caller.

To mute the headpiece microphone, press and release one of the MUTE keys. The ON/OFF/MUTE indicator will flash when the headpiece is in this mode.

To turn the mute mode off, press one of the MUTE keys again. Once the mute mode is disabled, the caller will once again be able to hear you and the ON/OFF/MUTE indicator will cease flashing, but remain lit.

On/Off Low B

Mute

On/Off Mute Redial/Pause

Flash Mem/Store Chnl

CHNL Key

If you experience interference during your phone conversation, press the CHNL key to select a new, clear channel.

If the portable unit is out of range or no other channels are clear, the portable unit will beep twice and remain unchanged.

FLASH Key (Home Office Use)

If you subscribe to special services from your phone company, (e.g.; call waiting), you may use the FLASH key to access these services.

On/Off Low B

Mute

On/Off Mute Redial/Pause

Flash Mem/Store Chnl

On/Off Low B

Mute

On/Off Mute Redial/Pause

Flash Mem/Store Chnl

12