AT&T 7410 manual Abbreviated Dialing AD, Or Dial Program code

[dial tone] [dial tone]

[dial tone]

Abbreviated Dialing (AD)

To program/reprogram an AD button

Note: AD buttons must first be assigned by your System Manager.

1On a separate sheet of paper, jot down the outside numbers, extensions, and/or feature codes you want to program

Note: Each AD button will hold one complete phone number or feature code.

2 Pick up handset

3Press [ Program ] (if this button has been assigned to your voice terminal)

or Dial Program code

4 Press [ AD xxxxx ] to be programmed

5Dial outside number, extension, or feature code you want to program (up to 24 digits)

Note: If you are programming an outside number, be sure to include a trunk code, if applicable.

6Press [ # ] (on the dial pad)

[confirmation tone], [dial tone]

●Number is stored

●Repeat Steps 4-6 to program additional buttons

7Hang up or press [ Drop/Test ] to end programming

To place an AD call 1 Press selected [ AD xxxxx ] [ringback tone]

●Call is dialed (silently)

7