AT&T 7650 user manual E R a T I N G R a N

.....O P E R A T I N G R A N

This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance - which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base and handset antennas fully extended.

If you receive a call while you are out of range, the handset might not ring - or if it does ring, the call might not connect when you press ilpHoNEl,. Move closer to the base, then press im to answer the call.

If you move out of range during a phone conversation,you will hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing .[OFF':,the phone will be left "off the hook." To hang up properly, walk

back into range, periodically pressing

-

.OFF_ until the PHONE light goes off.

Changing Channels

This cordless telephone has an advanced 25-channel Autoselect@ feature that minimizes the chance of interference. Every time you answer or make a call, the Autoselect feature automatically searchesfor and selects a clear channel.

In the unlikely event you notice noise or interference while using the handset:

1Press [CHANNEL..

2If the interference doesn't clear.

continue to press iCHANNELi until you find a clear channel (your call will not be interrupted)

- OR -

Move closer to the base and press

iCHANNELi.

NOTE: You must be in range to change channels. Ifyou press E i G S i while out of range, you might lose the call. I f you do lose the call,place the handset in the base for afav seconds,thenmake the call again.