6Issue 1 March 1996
Abbreviated Dialing 0The Abbreviated Dialing (AD) feature allows you to store phone numbers and
feature access codes for repeated use. This section describes two different
ways of storing AD numbers: automatic dialing buttons and personal AD lists.
Automatic dialing buttons give you direct access to a designated number that is
not stored on an AD list. Automatic dialing buttons must be activated through
system administration before you can program a phone number for that button.
Up to three personal lists can be assigned for each voice terminal.
Automatic Dialing Buttons 0
To program an automatic dialing button that is stored on your Feature Direct ory,
do the following:
1. On a sheet of paper, write down the phone number s and feature access
codes you want to store.
2. Go off-hook.
■You hear a dial tone.
3. Do one of the following:
a. Press , and then press the dial keypad number assigned
to the AD Program feature.
b. Dial the AD Program feature access code _____.
■You hear a dial tone.
4. Press , and then press the dial keypad number for the button you
wish to program.
■You hear a dial tone.
5. Dial the phone number or feature access code you want to store (up
to 24 digits).
6. Press .
■You hear a confirmation tone followed by a dial tone.
Feature
Feature
#