Getting started

Installation options

3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right.

4. Plug the power adapter into an electrical outlet

 

not controlled by a wall switch. Plug the telephone

 

line cord into a telephone wall jack. To mount the

 

telephone on the wall, position the mounting holes

 

and over the telephone outlet mounting studs.

 

Press and slide the bracket down firmly so the

 

telephone is held securely on the telephone outlet

 

mounting studs.

Telephone outlet mounting studs

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the directions below.

1. Remove the telephone base from the wall. Unplug

2. Insert the bracket tabs into slots

the cords from the wall jacks. Remove the bracket

and

on the telephone base, then

from the telephone base.

press the other bracket tabs into

 

slots

and .

3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.

9

Page 12
Image 12
AT&T 91-001105-040-100 user manual Tabletop mounting