Store Call in Memory, To LOCATION? | AT&T 9230 guide

CALLER ID OPERATION

Store Call in Memory

1Press > until the screen displays the call information you want to store.

SAVE DEL AltDial

973-555-0123

5/01 5:40PM CALL28

2Press twice.

TO LOCATION? 01

973-555-0123

5/01 5:40PM CALL28

3Press to store the call information in the memory location displayed in the upper right corner

— OR —

Press <, then enter a two-digit memory location (01-50).

4Press . You’ll hear a series of beeps confirming the number was stored.

5If you try to store information in an already occupied location, the screen displays

OVERWRITE? NO 973-555-0123

5/01 5:40PM CALL28

Press to exit without replacing the number already stored in that location

— OR —

Press > to display YES, then press to replace the previous number with the new one.

18

Image 19

AT&T 9230 user manual Store Call in Memory, To LOCATION?

Contents

MHz Cordless Telephone With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents About Caller Identification Caller ID Before YOU Begin Before You Install Installation Check for dial tone Table/Desk Installation Wall Installation Auto Answer On/Off Feature SettingsTime/Date Ringer Selection Telephone Operation Handset Locator Headset Jack Display Screen Messages Operating Range Store Memory Numbers Telephone Memory Delete a Specific Number Edit Numbers Stored in MemoryDelete Numbers Stored in Memory Move Numbers Stored in Memory Dial Memory Numbers Caller ID Operation Review Call History About Call History Delete All Calls Delete Call HistoryDial a Displayed Number Delete a Specific Call To LOCATION? Store Call in Memory Turn Off Call Block Call Block Private Name Batteries Charging the Handset Battery Pack Replacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels