AT&T 9230 FEATURE SETTINGS

Time/Date

1Press Guntil the screen displays

2Press . The month flashes.

3Use <or >to select the correct month.

4Press .

5Repeat Steps 3 and 4to set the day,hour,minute and AM or PM.

Ringer Selection

1Press Guntil the screen displays

2Press >to select 1,2,3,4,or OFF. You hear a sample of each ring

displayed.

3Press to choose the displayed ringer.

Auto Answer On/Off

You can set the handset to answer a call automatically when you lift it from

the base (you won’t have to press any keys).

1Press Guntil the screen displays

2Press >to select OFF (you must press a key to answer a call) or

ON (the call is automatically connected when you lift the handset

from the base).

3Press to choose the displayed setting.

AUTO ANS? ON

RINGER? 1

SET TIME

4/26 4:02PM

FEATURE SETTINGS

Contents

Main Page CONTENTS BEFORE YOU BEGIN . . . . . . . . . . . . . .3 IN CASE OF DIFFICULTY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 4 FEATURE SETTINGS BEFORE YOU BEGIN About Caller Identification (Caller ID) Before You Install Table/Desk Installation Wall Installation 4 Follow Steps 35 in Table/Desk Installation. 1 Connect the telephone line cord . 2 Connect the power cord. 3 Mount the base on the wall. FEATURE SETTINGS Time/Date Ringer Selection Auto Answer On/Off 8 End a Call Hold Answer a Call Change Channel 9 Page/ Handset Locator Headset Jack 11 Display Screen Messages Screen Displays: When: Operating Range Store Memory Numbers Presses Dial Key 12345 13 Edit Numbers Stored in Memory Delete Numbers Stored in Memory Delete a Specific Number Delete All Numbers Stored in Memory Move Numbers Stored in Memory Dial Memory Numbers Page About Call History Review Call History 17 Delete Call History Delete a Specific Call Delete All Calls Dial a Displayed Number Store Call in Memory 19 Call Block Turn Off Call Block 20 Display Screen Messages Screen Displays: When: BATTERIES Charging the Handset Battery Pack BATTERIES Replacing the Handset Battery Pack 23 IN CASE OF DIFFICULTY If the phone doesnt work at all,check these items first: If the above suggestions dont solve the problem,try re-initializing the handset and base: If you hear a two-beep signal when you try to use the handset: If the phone does not ring when you receive a call: