AT&T 952 user manual Automatic Redial, Switching Between Lines During a Call, Conference Calls

T E L E P H O N E O P E R A T I O N

Automatic Redial

This phone can automatically and repeatedly redial the last number you called. Press Lor l, then press awithout lifting the handset or pressing Kor h. You will hear the numbers being dialed. When the call is answered, you must either lift the handset or press Kor hto talk.

If the line called is busy, the phone will redial every 40 seconds up to 10 times (timing begins when the phone is on hook).

To stop automatic redialing at any time, press aagain. Lifting the handset or pressing Kor hwill also cancel Automatic Redial.

NOTE: This feature will not work if Cis pressed. This feature works when the handset is on hook.

Switching Between Lines During a Call

During a call on one line, you can make or answer a call on the other line by pressing H. You can use the Hand LINE buttons to switch back and forth between calls as often as necessary.

Example: While using Line 1, Line 2 rings:

1Press Hto hold Line 1.

2Press lto answer the other call.

3Press Lto hang up Line 2 and return to your first call

— OR —

Press Hto hold Line 2, and press L to return to your first call.

Conference Calls

You can use both lines at the same time to set up a three-way conference call.

1Make or answer a call and press H.

2Establish a call on the other line.

3Press C.

4Hang up to end a conference call.

If one caller hangs up during a conference call, you might hear a dial tone. Press the LINE button of the remaining call to disconnect the other line and eliminate the dial tone.

NOTE: Under certain circumstances, the far-end parties on a conference call may not hear one another clearly.

Conference Call Options

To place a conference call on Hold:

1Press Hto hold both lines.

2Press Cto release Hold then lift the handset or press Kor hand

continue your conference call.

To talk privately with one caller:

1Press the LINE button of the person with

whom you want to speak privately then lift the handset or press Kor h.

2Press Cto continue your conference call.

To disconnect one party from a conference call and keep the other on the line, press the LINE button of the call you want to continue.

NOTE: If you leave the Cbutton down after a conference call, then dial another number, your call might be completed, but you might hear a busy signal from the other line. Press H, then press each LINE button until you identify the line being used for your completed call.

6