AT&T 972 user manual Telephone Memory, Storing Memory Numbers, Directory Card, One-Touch Dialing

972_00_1ATT BOOK 12/4/01 1:37 PM Page 17

TELEPHONE MEMORY

Directory Card

Remove the plastic cover and the directory card. Write your telephone numbers in the spaces provided, and write the telephone numbers (or names) that you want to store in each memory location. Replace the card and plastic cover in the space provided.

One-Touch

Dialing

The 9 white

spaces on the directory card are

one-touch memory locations. You can dial one of these numbers by pressing the memory button next to the number.

Two-Touch

Dialing

The 9 gray spaces on the directory card are

two-touch memory locations. To dial one of these numbers you must press W, then the memory button next to the number.

Storing Memory Numbers

1Press P.

2Enter the telephone number you want to store (up to 24 digits). The number is displayed as you enter it.

3To enter a space in the number display, use the softkey to select SPACE when entering the telephone number. If you make a mistake, use the softkey to select BKSPACE, and re-enter the digit.

4Press the one-touch (white space) location where you want to store the number (you will hear a confirmation tone)

— OR —

Press W, and the two-touch (gray space), location.

5Repeat Steps 2-4to store another number

— OR —

Press P to exit.

17