AT&T A837 Rugby user manual In-Call Options, Address Book Allows you to access your Address Book

•The current call (caller #2) is placed on hold and the previous call on hold (caller #1) is reactivated so you can continue conversing with that person.

2.Press the key to end the currently active call.

To end a specific call:

1.Press the Options soft key. Use the navigation keys to

highlight End Call and press the Select soft key or the

key. -Or-

Press the key.

2.Press the key to end the remaining call.

In-Call Options

During a call, press the Options soft key to access the following:

•Video Share: Initiates a video sharing session. Video can be Live or Recorded.

•Hold: Places the current call on hold.

•Address Book: Allows you to access your Address Book.

•New Call: Places the current call on hold and then allows you to enter and dial another number.

•Send Message: Allows you to create and send a new Text message or Multimedia Message.

•More: allows you to select one of the following options:

–Calendar: Temporarily accesses your calendar while maintaining the active call.

–Notes: Temporarily accesses your notes while maintaining the active call.

–Whisper Mode On/Off: Increases the microphone sensitivity level. Used in quiet environments such as theaters, meetings, etc.

–Mute Keypad Tone: Silences/mutes the key tones when on the call. Select Send Keypad Tone to turn this feature off.

–Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the selected contacts. You can send these DTMF tones as a group, only if the network supports this function. The DTMF tones are used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.

•End Call: Allows you to end the active call.

If you are on a call, select the New Call option and dial another number or answer another incoming call to place the active call on hold.

When the second call activates, these options are available.

•Swap: Places the active call on hold and then re-activates the call on hold.

•Join: Joins all of the established calls (both active and on hold) into a multi-party call.

Press the key to end each call.

29