3.Use the Up or Down Navigation key to highlight one of these options:

MEdia Net

AT&T MMS

AT&T IMS

4.Press the Options soft key.

Important!: The WAPs are pre-configured and cannot be altered on this screen. The MMS connection option can be edited, renamed, or deleted. Your phone is set up by default to connect to the network. If you change the settings without checking with your service provider, the web browser, MMS, and e-mail features may not work properly.

5.To create a new connection, press the Options soft key,

select New, and press the Select soft key or the key. - Or -

To edit the existing MMS, highlight this entry, press the Options soft key, select Edit, and press the Select soft key

or the key.

6.Select the parameter you want to edit:

Set Name: enter a profile name.

Access Name: edit the access point name.

Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

User ID: enter the User ID required to connect to the network.

Password: enter the user password required to connect to the network.

Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.

Home URL: enter the URL address of the homepage.

Gateway address: (WAP only) enter the gateway address of the proxy server.

Proxy address: (HTTP only) set the proxy server address and port.

Linger Time (Sec.): set a time period (in seconds) after which the network is disconnected if there is no new data traffic.

Advanced Settings: allows you to configure some of the IP-

specific information: Static IP, Static DNS, Server information, and Traffic Class.

Static IP: specify if you want to manually enter an IP address. Remove the check mark if you want the server to automatically assign the IP address.

Local phone IP: if you checked the Static IP option, enter the IP address obtained from the network operator

Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. Remove the check mark if you want the server to automatically assign the address.

81

Page 84
Image 84
AT&T A837 Rugby user manual Press the Options soft key, Connection None, Normal, or Secure