NEW Call, Alert tones | AT&T ATT1080 guide

Getting started

NEW CALL

•On when there are unreviewed calls.

•Flashes when there are new voice mail messages.

The screen will display ”COVM”, with “1”, “2”, “3”, and/or “4” under “COVM”, depending on which lines have messages waiting.

INTERCOM

• On when the telephone is on an intercom call or a paged call.

• On when the system is busy and the intercom is unavailable.

• Flashes during an incoming intercom call’s ringing.

HEADSET

• On when the headset is in use.

• Flashes when there is an auto-redial call with the headset.

MUTE

• On when the microphone is muted.

• On when the speakerphone is in use.

• Flashes when there is an auto-redial call with the speakerphone.

Confirmation tone	Programming command completed successfully.
One double-beep	Message alert tone feature is on and there are
every 30 seconds	new private or central messages or when the
	hold reminder feature is on and there is a line
	on hold.
A triple-beep	During volume adjustment, the volume level is
	at the maximum or minimum.