NOTES:
•When the telephone automatically redials, it always uses the prime line.
•While reviewing the numbers in the redial stack, if you want to place a new call other than the displayed number, you need
to press and hold [ENTER] or wait for 30 seconds to return to idle.
•Within the
[
SPEAKER] or [HEADSET] if you want to stay in the call, otherwise, the line will hang up and redial again.
•During these 30 sec- onds, if you want to end the auto- redial attempts, press [
SPEAKER] twice (or [HEADSET] twice if the headset is being used).
Telephone operation
Basic phone operation
Auto-redial
This phone can automatically redial a number every 60 seconds up to ten times. When the phone automatically redials the number, it always uses the line you originally used to dial the call.
1.Follow the instructions under Redial stack, (page 17), to find the number you want to call.
2.Press a [LINE] button.
Press [
SPEAKER] or [HEADSET].
Press [ENTER]. Scroll to AUTO REDIAL and then press [ENTER] again.
3.When the other line rings or the other party answers, to speak with the other party, lift the handset.
Press [
SPEAKER].
Press [HEADSET] if the headset is connected to speak with the other party.
While
•The telephone will activate the speakerphone or headset (depending on the AUTOMATIC MODE you set, page 39 of the installation guide) and call the desired number automatically. The [(AUTO) REDIAL] light will flash.
•If the line is busy, there is a busy tone lasting for approximately
NOTE: During these 30 seconds, if you want to stop the
This process will be repeated up to 10 times or until the called number is free to accept calls. If the line is still busy after 10 attempts, no more attempts will be made.
18
