Telephone operation
Basic phone operation
HOLD
You can use the hold feature to hold one line while accessing another, or as part of the conference and call transfer features.
While on a call, press and release [HOLD]. The LINE light for the line on hold flashes slowly in green, and a
If you were using the handset, you can place the handset in the telephone base without disconnecting the call. If you were using the speakerphone, the speakerphone is automatically turned off when you press [HOLD].
To release the hold, press and release the [LINE] button of the call on hold.
NOTES:
•The phone automatically disconnects a call on hold after 20 minutes. To keep a call on hold lon- ger than 20 minutes, release hold within 20 min- utes and then place the call on hold again.
•You cannot put an intercom call on hold.
•If a line is in use, pressing [INTERCOM] will place the line on hold and activate the intercom (page 26).
20
