AT&T CL80111 user manual Charge light Step

Getting started

Battery installation and charging

BY 1021

BT183342/BT283342

Step 1

Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated.

Step 2

Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

CHARGE light

Step 3

Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging.

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date/time in the telephone system user’s manual for details. To skip setting the date and time, press

OFF/CANCEL.

IMPORTANT INFORMATION

• Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

•If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.