Aztech Systems DSL9100R C.1.2 Networking Features, C.1.3 Local Area Network Specifications

User ManualUser Manual

User Manual

•RFC 2516 PPP over Ethernet Relay support

•Up to 8 Multiple PVCs

•OAM (I.610) F4/F5 Loopback, Send, and Receive

C.1.2 Networking Features

•IEEE 802.1d Transparent Bridge

•Static, RIP1, RIP2 routing support

•NAT  IP Masquerading

•DHCP Server

•DNS Relay Agent

•IP Port Forwarding

•PPTP Access Concentrator

•Telnet server for Remote management

•TFTP Server and Client for software update

•SNMP version 1 Agent

C.1.3 Local Area Network Specifications

•Store and Forward Switch Architecture which provides better integrity of data and

prevents wrong order of packets at the output ports.

•Provides 2Kbyte Frame Buffer Memory per port

•Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports

•Supports full-wire speed, full-duplex traffic on every port simultaneously.

•Fully support IEEE 802.3 Ethernet and Fast Ethernet

•Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of

transmission modes, half and full duplex as well as transmission speeds, 10 Mbps

or 100 Mbps

•Supports self-learning Layer 2 Address Resolution and has a storage capacity of 17K

MAC addresses

 Supports IEEE 802.1x Flow Control in Full Duplex and Back Pressure for Half-Duplex.

 Multi-stand design allows for convenient and flexible placing