9
User ManualUser Manual
User ManualUser Manual
User Manual
For more than 4 PCs connections
Expand using Ethernet Hub or Switch
- To connect to the MDI port of your Ethernet Hub/Switch, please use Straight
CAT-5 UTP Ethernet cable.
- To connect to the MDIX port of your Ethernet Hub/Switch, please use Cross
CAT-5 UTP Ethernet cable.
1.4 Features Full Rate and G.lite transmission supported
RFC1483 Ethernet and IP Encapsulation over ATM, RFC1577 Classical IP over ATM,
RFC2364 PPP over ATM, RFC 2516 PPP over Ethernet protocol with additional
software stack support
Static IP, RIP1 and RIP2 routing support
SNMP support for management functionality
Remote management through Telnet console access
Network Address Translation (NAT) / Port Address Translation (PAT)
DHCP Server
TFTP Software update
PAP/CHAP Password Authentication
Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports for Local Area Network
access
Fully support IEEE 802.3 Ethernet and Fast Ethernet
Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of
transmission modes, half and full duplex as well as transmission speeds, 10 Mbps
or 100 Mbps
Stack-ability design to allow for addition of additional switch and Wireless LAN
modules
Multi-stand design allows for convenient and flexible placing