Aztech Systems DSL9100R 4.1 Configuring the Ethernet Card

18
User ManualUser Manual
User ManualUser Manual
User Manual
4.1 Configuring the Ethernet Card
i) Power on your DSL9100R.
ii) From your Windows desktop, right-click on the Network Neighborhood icon. Select
Properties.
iii) From the Configuration tab, select TCP/
IP-> 3Com EtherLink III ISA [3C509b-
TPO] in PnP mode6 and click Properties.
(If you do not see a TCP/IP networking protocol, re-
install your Ethernet card.)
6 This guide uses 3Com EtherLink III ISA Ethernet Card as an example. Select the Ethernet
Card that is listed in your system.
iv) Select the IP Address tab.
Select the option 'Specify an IP
address'.
Enter the IP Address and
Subnet Mask as given by
your System Administrator.
Click OK to save the
settings.
When prompted to restart,
click Ye s .
Please proceed to verify the link between your Ethernet Card and DSL9100R.