AT&T Communications System user manual Instructions for using SpeedCall are on pages 14

NOTE: Press HOLD/PAUSE to enter a 1½ second pause in a number if, for instance, you want the system to wait for a dial tone or access tone before continuing dialing. If the line you are using

is customized as a PBX/Centrex line and the code has been customized into the system, the system will put the pause in for you. Consult the person in your company who maintains your system. A "switchhook flash," sometimes used for local dialing services or PBX/Centrex codes, may be entered as the first button press in a number by pressing RECALL/DROP. A total of 16 digits, pauses, and the one flash may be stored as one number.

■Erasing Numbers

6-Button Telephone: ● Press INTERCOM. ● Lift receiver (or press SPEAKER). ● Dial ✱ 0 (zero).

●Press MEMORY. ● Dial two-digit code for number you want to erase.

24-Button Telephone: ● Press INTERCOM. ● Lift receiver (or press SPEAKER). ● Dial ✱ 0 (zero).

●Press MEMORY. ● Press auto-dial button of number you want to erase.

■Changing Numbers

Follow the instructions for storing numbers. Be sure you change your Reference Card directory and the auto-dial labels on 24-button telephones.

■Using SpeedCall

Instructions for using SpeedCall are on pages 14 and 15.

33

SpeedCall