AT&T Communications System user manual Personal SpeedCall 2448 System

SpeedCall

34

Personal SpeedCall (2448 System)

■Storing Numbers

Plan the numbers you want to store in your Personal SpeedCall memory. These numbers are available only at your telephone. A directory is provided on the Reference Card so that you may list the stored numbers. You may store up to 12 numbers in memory. EACH OF THE 12 NUMBERS MUST BE GIVEN AN INDIVIDUAL TWO-DIGIT CODE, USING NUMBERS 10 through 21. You may choose to program some or all of your Personal SpeedCall numbers on multi-purpose buttons. See page 11 for other uses of multi-purpose buttons. Be sure you label SpeedCall buttons with the name AND THE TWO-DIGIT CODE FOR THAT NUMBER.

To store a number in your Personal SpeedCall memory, ● Press INTERCOM. ● Lift receiver (or press SPEAKER). ● Dial ✱ 0 (zero). ● Dial number you want to store. ● Press MEMORY.

[Optional: ● Press a multi-purpose button if you want to program number on a SpeedCall button.]

●Dial the individual two-digit code (10 through 21). (Every SpeedCall number must have a different two-digit code.)

To store another number, ● Dial number. ● Press MEMORY. [Optional: ● Press a multi-purpose button if you want to program number on a SpeedCall button.] ● Dial individual two-digit code.

If you make an error when entering a telephone number, press the INTERCOM button with indicator light ON and enter number again. When you are finished storing numbers, ● Hang up receiver (or press) SPEAKER).