Troubleshooting Guide..............................................................................
PROBLEM | CAUSes | Solutions |
|
|
|
Transmitter is blank. | Transmitter is Off.. | Press any button for 1 second.. |
| . | . |
| Battery is dead. | Replace battery. |
|
|
|
Can’t access all the desired stations | Maximum station number is . | See “Setting the Maximum Station stations Number” |
on the transmitter. | set wrong. |
|
|
|
|
Receiver doesn’t beep two times | SmartPort is not connected properly.. | Recheck the SmartPort installation.. |
after plugging it into the SmartPort®. | . | . |
| Controller has no power. | Check controller power. |
|
|
|
Receiver beeps twice after plugging | Receiver and Transmitter addresses | Relearn address at Receiver. |
it in, but won’t respond to the | don’t match. |
|
transmitter. |
|
|
Transmitter display stays on. | Transmitter will turn off | Wait approximately 2 minutes without pressing any |
| automatically. | buttons. Transmitter will “fall asleep.” |
12
