AT&T Communications System user manual Parts of the Telephones Button Telephone, Buttons

6

Parts of the Telephones

24-Button Telephone

Labeling Buttons

To remove old labels:

●Insert end of paper clip into notch of clear cover

●Slide cover sideways

●Lift cover and label

To add new labels:

●Fill out label

●Replace label and cover (rough side up)

Labeling Intercom Extension

Number:

●Locate plastic hook under receiver

●Push down on hook and slide up

●Lift off clear plastic window

●Locate ICM label

●Write intercom extension number on label

●Place label and plastic window on hook

●Slide hook back into telephone

LINE. AUTO-DIAL. PROGRAMMABLE BUTTONS and INDICATOR LIGHTS (308/616 System)

Buttons 1-6 are line buttons for incoming telephone lines. 24-button sets have 16 auto-dial buttons for making outside and intercom calls and two buttons that may be programmed at the telephones for manual signaling or paging. See page 8.

BUTTONS 1-6

LINE AND MULTI-PURPOSE BUTTONS and INDICATOR LIGHTS (2448 System) Line buttons, for incoming telephone lines. are assigned by the person who custom- izes your system and will be labeled as incoming Iines. Multi-purpose buttons may be programmed by you to be Personal SpeedCall buttons, intercom extension buttons, or special use buttons for paging, manual signaling or entering account codes. See page 10.