AT&T E1813B, E1814B Belt clip & optional headset, Install belt clip as shown below if desired

Models: E1814B E5812B E5813B E5814B E1812B E1813B

1 65
Download 65 pages 17.33 Kb
Page 13
Image 13

Getting started

Belt clip & optional headset

Install belt clip as shown below if desired.

Snap belt clip into notches on both sides of handset.

To release belt clip from handset, lift one side of the belt clip out of the notch.

For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.

Plug 2.5 mm headset into the jack on the side of hand- set (beneath small rubber cap).

NOTE: If the sound quality of the headset is not good, try unplug- ging it, and firmly plugging it in again.

10

Page 13
Image 13
AT&T E1813B, E1814B, E1812B, E5812B, E5814B, E5813B Belt clip & optional headset, Install belt clip as shown below if desired