AT&T E1812B Remote access, Stop, ‡Š—“’ƒŠƒŽ†ŒƒŒ“‹€ƒ, Œ‚‚”Œƒ’Œƒ–’‹ƒ‘‘ ƒƓ

Answering system operation

1. ‡Š—“’ƒŠƒŽ†ŒƒŒ“‹€ƒ

from any touch-tone tele- phone.

2. When the system answers, enter two digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

Hang up to end the call

4. and save all undeleted messages.

Remote access

A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 36) to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete the message	Press once during playback to
3	delete current message. Press
33	twice to delete all old messages.
Repeat or go back	Press during the caller’s message
4	to repeat the message. Press dur-
	ing the beginning of the day and
	time announcement to go back to
	the previous message.
Stop	Press to stop any operation (stop
5	playback, stop recording).
Skip to next message	Press to skip the current message
6	Œ‚‚”Œƒ’Œƒ–’‹ƒ‘‘ ƒƓ

NOTE: If you pause for more than four seconds dur- ing remote access, you will hear a help menu listing all features and commands. If there is no command entered for another 20 sec- onds, the call will end auto- matically.

Record announcement	Press * 7, wait for the beep, then
*7 to begin recording	begin speaking. Press 5 to stop
5 to stop recording	recording and hear the playback
	of new announcement.
Help menu	Press to hear list of features &
*5	commands.
Turn system off	Press to turn off answering sys-
0	tem. Incoming calls will no long-
	er be answered.
Turn system on	If off, system will answer after
0	10 rings. Enter your access code,
	then press 0 to turn the answer-
	ing system on.
Exit	Press 8 or hang up to end the
8	remote access call.

41