AT&T E2811 user manual Changing feature options, To set selection

Answering system operation

1.	SETUP
	until desired feature
	is heard (see list at
	right).

Changing feature options

You can change how the answering system oper- ates. Press SETUP repeatedly to hear each feature. When you hear the feature you want to modify press SKIP or REPEAT to change the setting. Press SETUP to set selection and move to next menu

option, or press PLAY/STOP to exit.

Feature options (default settings underlined).

System announces: Feature description:

2. SKIP or

REPEAT

until desired selection is heard.

3.	SETUP
	to set selection and
	move to next menu

"Number of rings," current setting, then "To change the setting press SKIP or REPEAT; to continue setup, press SETUP." Options: 2/4/6/toll saver

Choose number of rings before the sys- tem answers a call. When toll saver is active, the system answers after two rings if you have new messages, and after four rings if you have no new messages. When retrieving messages from a long distance call, you may disconnect your call after three rings so that there will be no long distance charge incurred.

option.

- OR -

PLAY/STOP

“Base ringer,” cur- rent setting, then “To change the setting press SKIP or REPEAT; to continue setup, press SETUP.” Options: high/low/off

Choose telephone base ringer volume to high or low level, or turn the telephone base ringer off.

to set selection and exit menu.

NOTES:

1.The message alert tone will beep only if all the conditions below are met:

Answering system is on

Message alert tone setting is on

Have new messages

2.Press any base key (except

RECORD,ANSWER ON andHANDSET LOCATOR) to temporarily silence the mes- sage alert tone. If you press and hold DELETE you will delete all old messages and the message alert tone will be temporarily silenced. The mes- sage alert tone will be re-acti- vated with the next incoming message.

"Remote access code,"	Select a two-digit number (10-99) for
current setting, then	remote access from another
"To change the setting	telephone (page 38).
press SKIP or REPEAT;
to continue setup,	NOTE: Press and hold SKIP or
press SETUP."
Options: (select two-	REPEAT to increase or
digit code) 19­	decrease the remote access code
	number by 10.
"Message alert tone,"	When on, the telephone beeps every
current setting, then	10 seconds when there are new mes-
"To change the setting	sages.
press SKIP or REPEAT;
to continue setup,
press SETUP." Options:
on/off

33