AT&T E2811 user manual Belt clip & optional headset, Install belt clip as shown optional

Getting started

Belt clip & optional headset

Install belt clip as shown (optional).

Snap belt clip into the notches on both sides of handset.

To release belt clip from handset, lift one side of the belt clip out of the notch first before detaching the whole belt clip from handset.

For hands-free telephone conversations, use any industry standard 2.5 mm head-

set (purchased separately). For best results, use an AT&T 2.5 mm head- set. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.

Plug 2.5 mm headset into the jack on the side of handset (beneath small rubber flap).

NOTE: If the sound quality of the head set is poor, try unplugging it, and firmly plugging it in again.

10