Getting Started
Battery installation & charging
After installation, place the handset in the base and allow batteries to charge for 12 hours before use. You can keep batteries charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
Press coin into slot on base of handset to release latch, then remove battery cover
To replace battery cover
Insert top tab first
1
LOW BATTERY
REDIAL 2:10 PM CID LOG
Low battery indicator
Return handset to base to recharge when this symbol flashes. (Handset will beep when battery is low.)
Insert supplied batteries
Caution: Use only AT&T 2AA NiCad or NiMH rechargeable batteries. Do not use AA alkaline batteries.
Place handset in base to charge for 12 hours before first use.
Rotate antenna to fully upright position
Press down to click in place
DID YOU KNOW?
DID YOU KNOW?
Optional spare batteries can be kept charged in Optional spare batteries can be kept charged in the base, for quick replacement when handset the base, for quick replacement when handset batteries become depleted (see page 47). batteries become depleted (see page47
7
