1.
Press TIME/SET
The system will announce the cur- rent clock setting, then announce “To begin setting the clock, press TIME/SET, then press CHANGE to change the setting or press TIME/SET to continue.”
2.
Press TIME/SET
3.
Press CHANGE
until the system announces the cor- rect day, then press TIME/SET.
4.
Press CHANGE
until the system announces the cor- rect hour, then press TIME/SET.
5.
Press CHANGE
until the system announces the cor- rect minutes, then press TIME/ SET.
6.
Press CHANGE
until the system announces the cor- rect year, then press TIME/SET. The system announces the current clock setting.
Answering System Operation
Turning the answering system Dayonandofftime announcements
To set day and time
Before playing each message, the answering system announces the day and time the message was received.
Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
The system uses voice prompts to guide you. Each time you press CHANGE, the day, hour, minute or year advances by one.When you hear the correct setting, press TIME/SET to move to the next setting.
To check day and time
You can press TIME/SET at any time to hear the current day and time without changing it.
NOTE: Press and hold CHANGE to advance the minute or year by increments of 10 (the year can be set from 2000 to 2039).
NOTE: Caller ID provides the time and date. Set the year so that the day of the week can be calculated from the Caller ID information. After you set the time once, it will thereafter be set automatically with incoming Caller ID infor-
mation. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 8).
31
