AT&T E5947B, E5937B, E5927B, E5926, E1937B user manual Wall mounting

Getting Started

Wall mounting

The base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, computer rout- ers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

1)Connect telephone line cord and power adapter to tele- phone jacks and wall jacks, as shown on page 9.

2)Install wall mount bracket onto set. First put the two front wall-mount-bracket tabs into

the front notches on bottom of telephone base, then squeeze the rear tabs of the wall mount bracket as you insert them into the rear notches on the bottom of the telephone base.

Plug power adapter into an electrical outlet not controlled by a wall switch.

3) Position the wall mount brack- et over the wall outlet mount- ing pegs, and press and slide the wall mount bracket down firmly so it is held securely on the outlet mounting pegs.

Plug telephone line

cord into the telephone jack.

11