24
25
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with
technical requirements adopted by the Administrative Council
for Terminal Attachments (ACTA). The label on the back or
bottom of this equipment contains, among other information,
a product identifier in the format US: AAAEQ##TXXXX. This
identifier must be provided to your local telephone company
upon request.
The plug and jack used to connect this equipment to premises
wiring and the telephone network must comply with the
applicable Part 68 rules and technical requirements adopted
by ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. An RJ11
jack should normally be used for connecting to a single line
and an RJ14 jack for two lines. See Installation Instructions
in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine
the number of devices you may connect to your telephone line
and still have them ring when you are called. The REN for this
product is encoded as the 6th and 7th characters following
the US: in the product identifier (e.g., if ## is 03, the REN is
0.3). In m ost, but n ot all a reas, the sum of a ll RENs should be
five ( 5.0) o r less . For mo re info rmation , please conta ct you r
local telephone company.
This equipment may not be used with Party Lines. If you have
specially wired alarm dialing equipment connected to your
telephone line, ensure the connection of this equipment does
not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone
company or a qualified installer.