16
17
The answering
system does
not answer
after the
correct
number of
rings.
• Make sure the answering system is on. When
the answering system is on, the red light on
the ANSWER ON/OFF key should be lit.
• If Toll Saver is activated, the number of rings
changes to two when there are new messages
waiting.
• If the memory is full or if the answering system
is off, the system will answer after ten rings.
• In some cases, the answering system be
affected by the ringing system used by the
local telephone company.
The system
does not
receive caller
ID or the
system does
not display
caller ID
during call
waiting.
• Make sure you subscribe to Caller ID with Call
Waiting features services provided by the local
telephone company.
• The caller may not be calling from an area
which supports caller ID.
• Both you and the caller’s telephone compa-
nies must use equipment which are compat-
ible with caller ID service.
• If you subscribe to DSL service, install a noise
filter to the telephone line between the base
unit and the telephone line jack. Contact your
DSL service provider for filter information.
The
announcement
message is
not clear.
• When recording the announcement, make
sure you speak in a normal tone of voice
about nine inches from the telephone base.
• Make sure there is no background noise (tele-
vision, music, traffic, etc.) when recording.
In case of difficulty