AT&T Generic 3 manual Send ALL Calls, Speakerphone, To cancel Send All Calls

To adjust ringer volume if necessary (speaker is not active)

1To raise the volume, press the right half of the Volume control button labeled [ ∧ ];

to lower the volume, press the left half of the Volume control button labeled [ ∨ ].

SEND ALL CALLS

To send all calls (except priority calls) immediately to coverage

1While on-hook, press softkey below SAC (if shown on the display)

or	Press [ Send Calls ]	.
or Dial Send All Calls access code

To cancel Send All Calls

1While on-hook, press softkey below SAC again

or Press [ Send Calls ] again	.
or Dial Send All Calls cancel code

SPEAKERPHONE

NOTE: To use this feature, your voice terminal must be set for the Speakerphone (speak and listen) feature.

To place or answer a call without lifting the handset, or to use speakerphone with any feature

1Press [ Speaker ].

2Place or answer call, or access selected feature.

3Adjust speakerphone volume if necessary:

●To raise the volume, press the right half of the Volume control button labeled [ ∧ ];

to lower the volume, press the left half of the Volume control button labeled [ ∨ ].

To prevent the other party from hearing you

1Press [ Mute ].

●Red Mute light goes on.

2Press [ Mute ] again to resume talking to party.

●Red Mute light goes off.

8