Battery
Charging
Contacts
Handset
Hook
Base
Ringer
Base 
Extension
Label
Ext. 14
| MDC 9000 |
|
|
| Talk |
|
| Indicator |
Ringer Volume | Talk | Charge |
| Charge | Indicator |
|
| |
| Message |
|
|
| Message |
|
| Indicator |
|
| Ringer |
|
| Volume |
|
| Controls |
BASE |
|
|
Figure 2. MDC 9000 Telephone, Top View of Charging Base
The handset of the MDC 9000 has the following features as shown in Figure 1, Top View of Handset (the list begins with the antenna and then continues clockwise around the handset drawing):
Antenna
LCD Display
Outside Line or Intercom/ Programmable Feature Buttons
Drop Button
For receiving the transmissions from the radio module. This antenna is flexible and is permanently attached to the handset.
Provides information on the status of lines and range, battery power, etc.
When labeled with an extension number, these buttons indicate lines used for incoming and outgoing calls (call appearances) and for using the telephone as an intercom; when programmed and labeled with feature names, these buttons access features (feature buttons). In use, the light next to that button is lit; when a call is on hold, it winks.
For disconnecting from a call or dropping the last person you added to a conference call. The Drop button is NOT labeled. It is located in the lower right corner of the LCD display.
3
