[dial tone]
[dial tone]

5Dial personal list code (1, 2, or 3)

Version Note: If you are using System 75, Version 1, you may omit this step.

6 Dial list item (1, 2, 3...)

7Dial outside number, extension, or feature code you want to store (up to 24 digits)

Version Note: If you are using System 75, Version 1, you can use only up to 16 digits.

8 Press #

[confirmation tone]

Number is stored

Repeat Steps 4 through 8 if you want to program additional items on the same list; hang up and begin again at Step 1 if you want to program items on another personal list

9Hang up to end programming

Note: Keep your own personal lists in the Abbreviated Dialing table provided in the back of this booklet; group, system, and enhanced lists are available from your system manager.

To place a call using a personal, group, system, or enhanced list (enhanced lists apply to Generic 1 or Generic 3 only)

1Pick up handset

2Press On/Off

3 Press an available line button

4Dial appropriate Abbreviated Dialing List access code:

List 1 __________

 

List 2 __________

 

List 3 __________

[dial tone]

5Dial desired list item (1, 2, 3...)

Stored number is automatically dialed

16

Page 21
Image 21
AT&T MDC 9000 manual