Test (Local Test)
To verify the operation of the telephone’s visual and audio warning signals
1Remove the handset from the base
2Hold down the ringer volume control buttons, both
and 
, simultaneously, for at least two
seconds
The BATT, P, ON, MSG, STAT, and RANGE icons light, and you hear a double beep emitted from the handset
3To exit the local test mode, release the volume control buttons
or
return the handset to the base or turn off the handset
Note: If the ringers do not sound or the indicators do not appear, contact your system manager.
Transfer
To transfer a call to another telephone
1 Press Trans
Call appearance button for that call winks, and present call is put on hold
Calling party cannot hear you
Second call appearance becomes active
2Dial the number to which the call is to be transferred
Note: Remain on the line and announce the call if desired; if there is no answer or the line is busy, return to the held call by pressing its winking call appearance button.
3When the third party answers or when you hear the other telephone ringing, press Trans again
4Hang up or press the (unlabeled) Drop button
14
