Using the WallMount Template
1. If you wish, remove the
template from this booklet
by cutting or tearing
along this dotted line.
(if you do not use the
template, not that
screws should be
installed on a vertical line.
exactly 4 inches apart.)
2. Referring to the figure
below, hold the template
against the place on the
wall where you want to
mount the base.
Make
sure you hold the
template perfectly
straight
(use a level if
needed).
3. Using a nail, pencil, or
other pointed object, push
through each cross mark
on the template to mark
the spots where you drive
the mounting screws. See
"Installing the Base" for
instructions.