Getting started
Handset setup
Line selection
You can select the default telephone line to be used when you make outgoing calls. This handset comes factory set for Auto selectable line, which chooses the first available line for making a call. To select a particular line, choose Line 1, Line 2, Line 3 or Line 4.
1.When the handset is idle, press MENU/ENTER.
2.Press 
DIR or CID
to scroll to Handset setup. Press MENU/ENTER.
3.Press 
DIR or CID
to scroll to Line selection. Press MENU/ENTER.
4.Press 
DIR or CID
to select Auto, Line 1, Line 2, Line 3 or Line 4.
LCD contrast Key tone Language >Line selection
Back
Line selection :Auto
Back
5.Press MENU/ENTER to save the setting and return
to the previous menu. There is a confirmation tone. To exit without making changes, press 
OFF/CLEAR.
Change handset name
You can create a handset name for each registered handset.
1.When the handset is idle, press MENU/ENTER.
2.Press 
DIR or CID
to scroll to Handset setup. Press MENU/ENTER.
3.Press 
DIR or CID
to scroll to Handset name. Press MENU/ENTER.
4.Change the handset name when prompted.
•Press 
or 
to move the cursor to the left or right.
Key tone Language Line selection >Handset name
Back
Enter HS name: Handset 1
Back
•Use the dial pad to enter a name (up to 13
characters). Each time you press a key, a character on that key appears. Additional key presses produce other characters on that key. See the chart on page 45.
•Press 
OFF/CLEAR to backspace and delete characters.
•Press and hold 
OFF/CLEAR to delete all characters.
16
