8
Getting started
Add and register handsets
The handset provided with your SB67118 is pre-registered as
Handset 1. Additional handsets are assigned numbers in the order
they are registered (Handset 2 to Handset 10). You can register a
maximum of ten handsets.
You can add new handsets (SB67108, sold separately) to the
SB67118 at any time, but each new handset must be registered with
the telephone base before use. Each handset must be registered
separately.
If the handset does not have enough power to
proceed with the registration, you need to charge
the new handset for at least five minutes (see
page 7). Start registration when the handset screen
shows Press MENU on BS, sel Registration & sel
Register HS. Then put HS in cradle, you can start the registration.
To register a handset to your telephone base
1. Make sure the handset is out of the charger
and the screen shows Press MENU on BS, sel
Registration & sel Register HS. Then put HS in
cradle before you begin registration.
2. On the telephone base, press MENU/ENTER.
3. Scroll down to Registration and press
MENU/ENTER.
4. Press MENU/ENTER again to select Register HS.
5. Place the unregistered handset into the charger.
The telephone base screen shows Handset
registering. It takes up to 60 seconds to
complete the registration. You will hear a beep
when the registration is successful. The handset
shows Handset registered, and then shows
X:Handset X (X represents the extension number
[1-0]; Handset X represents the default handset
name).
COVM
Speed dial setup
Customer support
Registration
>
Register HS
Cordless headset
Deregistration
>
Handset
registering
Handset
registered
Press MENU on BS,
sel Registration
& sel Register
HS. Then put HS
in cradle.
2:Handset 2
Set date & time
Charging