Troubleshooting
Troubleshooting
I cannot dial out in LIFTER MODE.
•First try all the suggestions above.
•Make sure you have a dial tone before dialing. The corded handset or headset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing.
My corded phone is ringing, but I do not hear the call alert tone.
•Make sure LIFTER MODE is selected on the headset base.
•Make sure the ring detector is pushed all the way into the plug on the handset lifter.
•If the ring detector is not installed, there are no audio and visual alerts of incoming calls on the headset.
•Make sure the ring detector is installed close to the speaker of your telephone.
•Make sure that the 
ALERT ON/OFF on the lifter is on. If the 
ALERT ON/OFF is off, there are no call alert tones in the headset.
•It may be necessary to adjust the sensitivity of the ring detector. See page 12 for instructions.
•Make sure all cords and the telephone line cord are plugged into the appropriate outlets.
•Make sure your headset is charged.
19
