Getting started
Handset lifter installation
Connect the headset base
The cords provided with your lifter have colored labels attached to help you plug them into the headset base. The back of the headset base has color-coded dots above the jacks, and the jacks’ names on the rear bottom plastic piece of the headset base that correspond to the colored labels on the cords (see Figure 1 below).
You may attach the light blue label to the end of your telephone curly handset cord that you will plug into the headset base.
If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
Blue | Green | Red | Orange | Light blue |
Handset | Power | Wall | Base | Curly |
lifter | adapter | jack | handset | handset |
| | | jack | cord |
Figure 1: Rear view of the headset base connections
