Getting started
Handset lifter installation
The TL7000 handset lifter (lifter) works with the TL7610 or the TL7650 cordless headset to provide a complete communication solution. The lifter raises and lowers the handset to make and end phone calls. The ring detector provides an incoming call indica- tion through the cordless headset, so you can answer calls even if you are away from the telephone base. The lifter works with most corded telephones.
Lifter installation
Lifter arm height control
Motor
Switch hook presser
Small lifter pad
Large lifter pad
1.Make sure the
2.Keep the bottom of the handset mouthpiece on the corded telephone cradle while you pick up the handset. Place the earpiece against the small lifter pad.
3.Lower the handset with the lifter. Make sure that the switch hook press- er is above the area of the switch hook. If not, you have an option to add a large lifter pad (provided, see page 5).
4.Once you have completed these adjustments, take note and mark the position where the lifter is positioned on the telephone.
