Telephone operation
Intercom
Using the telephone base:
You can initiate an intercom call at the telephone base with any system handset.
1.Press HANDSET LOCATOR/INTERCOM on the
telephone base.
2.Enter a handset number. The screen will show CALLING HANDSET X. The called handset will ring, and its screen will show BASE IS CALLING.
3.On the ringing handset, press 
PHONE/FLASH, INT, 
SPEAKER, or any dial pad key
NOTES:
1.Before the intercom call is answered, you can cancel the
intercom call by pressing CLEAR or
HANDSET LOCATOR/INTERCOM on the telephone base.
2.If the called handset is not answered within 100 seconds or if it is in the directory or call log mode, or on a call, or out of range, the calling handset will show the message
UNABLE TO CALL TRY AGAIN.
3.Pressing 
OFF/CLEAR or MUTE/REMOVE on the cordless handset will temporarily silence the intercom ringer.
To end the intercom call:
•Press 
OFF/CLEAR or INT on the cordless handset.
Place the cordless handset in the charger.
Place the corded handset in the telephone base.
Press CLEAR or HANDSET LOCATOR/INTERCOM on the telephone base.
22
