Getting started

Headset attachments

Over-the-head band

To attach the head band to the headset:

1.Remove any headset attachment (earbud excluded) currently connected to the headset.

2.Insert the earpiece into the head band ring as shown in Figure 6.

3.Push the earpiece towards the head band ring until it clicks into place as shown in Figure 7.

4.Adjust the head band to fit your head. Adjust and rotate the angle of the headset until the microphone is pointing towards your mouth as shown in Figure 8.

Figure 6

Figure 7

Figure 8

NOTES:

To wear on your other ear, rotate the headset within the head band ring.

Firmly grip the padded head band ring with one hand whenever adjusting the headset microphone up or down (see Figure 8).

15

Page 19
Image 19
AT&T TL7700 user manual Over-the-head band To attach the head band to the headset