Appendix
Expand your telephone system
Add and register a handset
When first purchased, each expansion handset shows
Press and hold HANDSET LOCATOR on base for 4 sec, then press # on handset after a battery is installed. Each handset should be charged without interruption for at least 30 minutes before registering to the telephone base. For more details on battery charging, see the table on page 9.
To register a handset:
1.Press and hold
/HANDSET LOCATOR on the telephone base for about four seconds until the red IN USE light turns on.
2.Press # on the handset. Its screen shows Registering...Please wait and it takes up to 60 seconds
to complete the registration. The handset shows HANDSET X Registered (X represents the handset number assigned) and you hear a beep when the registration is completed.
For TL92320/TL92370/ TL92420/TL92470
For TL91270/TL91370
NOTES:
1.If the registration fails, the handset shows Registration failed for a few seconds and then Press and hold HANDSET LOCATOR on base for
4 sec, then press # on handset. Try the registration process again.
2.You cannot register a handset if any other system handset is in use.
11
