AT&T WF721 manual Using Your Device, Transferring a Phone Number, Making Calls, Three-Way Calling

Retrieving Messages

To retrieve voice messages, dial 1 on any home phone connected to the Wireless Home Phone base and wait four (4) seconds to connect to your AT&T wireless voicemail box. Simply follow the voice prompts to listen to and manage your messages. (Alternately, you may dial your 10-digit home phone number to access your voicemail box.)

Remote Retrieval

To retrieve voicemail messages from a phone not connected to the Wireless Home Phone base, dial the number associated with your Wireless Home Phone base service. When voicemail picks up, press *. You will then be prompted to enter your password. Simply follow the prompts to listen to and manage your voicemail messages.

Transferring a Phone Number

Transferring a landline phone number to your Wireless Home Phone base can take up to five (5) days. Outgoing calls can be made immediately using your Wireless Home Phone base, however incoming calls will continue through your old service until the transfer is complete. Keep a phone connected to your existing home wiring or prior service to continue to receive incoming calls until the transfer is complete. To check the status of your transfer, visit att.com/port.

12 Getting Started

Using Your Device

Making Calls

Using a phone connected to your Wireless Home Phone base, place and receive calls as you normally would. The Wireless Home Phone base supports both cordless and corded phone dialing methods.

Note: You will need to dial 10 digits even for local numbers.

Three-Way Calling

While on an existing call, press the Flash (or Phone/Talk) key on your phone to put the first party on hold. When you hear a dial tone, dial the second party’s number (wait up to four [4] seconds). When the second party answers, press the Flash (or Phone/Talk) key again to complete the three-way connection. If the second party does not answer, press the Flash (or Phone/Talk) key to end the connection and return to the first party.

Note: If your phone does not have a Flash (or Phone/Talk) key, use the off-hook mechanism supported by your phone instead.

Call Waiting

You will hear two tones if someone calls while you are already on a call. To hold the current call and accept the waiting call, press the Flash (or Phone/Talk) key. You can press the Flash (or Phone/Talk) key anytime to switch back and forth between calls.

To clear the current call and accept the waiting call, enter 1 and press the Flash (or Phone/Talk) key.

To reject (User Busy) the waiting call, enter 0 and press the Flash (or Phone/Talk) key.

Using Your Device 13