AT&T XG1000 user manual Router, Completed Configuration, Not Included

4.Plug the small end of the AC Power Supply into your IPC-1000 IP Camera AC Adapter port and the other end into an AC electrical outlet.

FOLLOW THE STEPS BELOW SET UP YOUR ENHANNCED REMOTE MONITORING STARTER KIT:

1.Take the XG1000 Controller AC Power Supply from your Controller box. Plug the small end into the port marked Power on your XG1000 Controller and plug the other end into an AC electrical outlet.

Example of completed configurations can be found below.

				IPC-1000 IP CAMERA
1	2	3	4
				INTERNET
		LAN	WAN	LAN
XG1OOO CONTROLLER		ROUTER		DSL/CABLE MODEM
	(NOT INCLUDED)			(NOT INCLUDED)

COMPLETED CONFIGURATION

			PLC
		ETHERNET
			ADAPTER	VIDEO TRANSMITTED OVER
				POWER LINES VIA PLC ETHERNET ADAPTERS
1	2	3	4
					INTERNET
	LAN		WAN	LAN		PLC
XG1OOO	ROUTER			DSL/CABLE MODEM	IPC-1000
						ETHERNET
CONTROLLER	(NOT INCLUDED)			(NOT INCLUDED)	IP CAMERA	ADAPTER

COMPLETED CONFIGURATION USING OPTIONAL PLC ETHERNET ADAPTERS (SOLD SEPARATELY)

2.Connect supplied Ethernet Cable to the LAN Ethernet port of the XG1000 Controller and connect the other end to a free Ethernet port on your router.

1 2 3 4

LANWAN

ROUTER

3.Connect one end of Ethernet Cable to the port on the bottom of the HomePlug

Turbo PLC Ethernet Adapter. Connect the other end to a second free port on your router.

NOTE: You can connect a network hub or switch to any available Ethernet port on your router, if you need additional ports.

Plug the HomePlug Turbo PLC Ethernet Adapter into an AC electrical outlet.

For best results plug the HomePlug Turbo PLC Ethernet Adapter modules into a free AC wall outlet directly or, if not possible, into an AC power strip that has no other AC Power Supply plugged into it. The length of the power strip cord, or separate extension cord, should be no more than 5 feet and it should not be coiled.

1 2 3 4

LANWAN

ROUTER

Once plugged into the AC electrical outlet, the LED’s light up on the front of the HomePlug Turbo PLC Ethernet Adapter should light up. If the LED’s do not light up on the front of the HomePlug Turbo PLC Ethernet Adapter, please confirm that there is AC power coming to the outlet.

3 4