Chapter 1. Introduction

Requirements

Consoles

ŠA DVI single link monitor capable of the highest resolution you will be using on any computer in the installation

ŠA USB keyboard

ŠA USB mouse

ŠStereo microphone and stereo speakers (optional)

ŠA USB Touchscreen panel device (optional)

Computers

The following equipment must be installed on each computer that is to be connected to the system:

ŠA DVI port

Š1 USB port for the mouse and keyboard

ŠMicrophone and speaker ports (optional)

Š1 USB port for the Touchscreen panel device (optional)

Cables

ŠFor optimal signal integrity, and to simplify the layout, we strongly recommend that you use the high quality custom KVM Cable that is provided with this package

ŠFiber optic cable (LC, single mode) to connect the Transmitter and Receiver CE680 / CE690 units

Note: It is recommended that you use a Single Mode optical fiber cable that conforms to IEC 60793-2-50 B1.1 or ITU-T G.652.B specifications.

ŠIf you wish to utilize the CE680 / CE690’s high-end serial controller function, you need to purchase an appropriate RS-232 cable

3